Overview »   Specifications   Parts »

Wetted Parts:
For 316: type 316 stainless steel, sapphire, ruby, gold, uhmw polyethylene, CTFE.
For PEEK: PEEK, sapphire, ruby, uhmw polyethylene, inert polymers.
Reproducibility:
typically ±0.3%
Viscosity Limit:
500 centipoise
Tubing Connections:
Inlet valves: 1/4"-28 low pressure plastic fitting for use with 1/8" plastic tubing (fitting and 60cm of tubing provided with pump).
Outlet valves for 316: 10-32 tube nut, ferrule for use with 1/16" tubing (tube nut and ferrule provided with pump).
Outlet valves for PEEK: 1/4"-28 plastic fittings for use with 1/16" tubing (tube nut and ferrule provided with pump).
Valves with special fittings available on request.
Dimensions (DxWxH):
13 cm x 18.5 cm x 12 cm (5.1 in x 7.3 in x 4.7 in)
Weight:
 2.6 kg (5.7 lbs)
Electrical:
Voltage/Frequency: 230VAC/50Hz
VA rating: 10
Fuse: 1/8 A
Motor:
brushless, AC Synchronous, impedance protected coils.

*Maximum flow rate specifications are based on theoretical volume displacement; actual flow rates will vary depending on such factors as fluid viscosity, compressibility and temperature.

Overview »   Specifications   Parts »