Overview »   Specifications   Parts »

Wetted Parts:
For 316: type 316 stainless steel, sapphire, ruby, gold, uhmw polyethylene, CTFE.
For PEEK: PEEK, sapphire, ruby, uhmw polyethylene, inert polymers.
For CTFE: CTFE, sapphire, ruby, gold, uhmw polyethylene.
Reproducibility:
typically ±0.3%
Viscosity Limit:
500 centipoise
Tubing Connections:
Inlet valves: 1/4"-28 low pressure plastic fitting for use with 1/8" plastic tubing (fitting and 60cm of tubing provided with pump).
Outlet valves for 316: 10-32 tube nut, ferrule for use with 1/16" tubing (tube nut and ferrule provided with pump).
Outlet valves for PEEK: 1/4"-28 plastic fittings for use with 1/16" tubing (tube nut and ferrule provided with pump).
Outlet valves for CTFE: 1/4"-28 low pressure plastic fittings for use with 1/8" tubing (plastic fitting provided with pump).
Valves with special fittings available on request.
Dimensions (DxWxH):
21 cm x 20 cm x 16 cm (8.25 in x 7.9 in x 6.3 in)
Weight:
5.5 kg (12.2 lbs)
Electrical:
Voltage/Frequency: 230VAC/50Hz
VA rating: 70
Fuse: .4 A
Motor:
brushless, AC Synchronous, TENV (totally enclosed non ventilated).

*Maximum flow rate specifications are based on theoretical volume displacement; actual flow rates will vary depending on such factors as fluid viscosity, compressibility and temperature.

Overview »   Specifications   Parts »