Overview »   Specifications   Parts »

Wetted Parts:
For 316: type 316 stainless steel, sapphire, ruby, gold, uhmw polyethylene, CTFE.
For PEEK: PEEK, sapphire, ruby, uhmw polyethylene, inert polymers.
For CTFE: CTFE, sapphire, ruby, gold, uhmw polyethylene.
Reproducibility:
typically ±0.3%
Viscosity Limit:
500 centipoise
Tubing Connections:
Inlet valves: 1/4"-28 low pressure plastic fitting for use with 1/8" plastic tubing (fitting and 60cm of tubing provided with pump).
Outlet valves for 316: 10-32 tube nut, ferrule for use with 1/16" tubing (tube nut and ferrule provided with pump).
Outlet valves for PEEK: 1/4"-28 plastic fittings for use with 1/16" tubing (tube nut and ferrule provided with pump).
Outlet valves for CTFE: 1/4"-28 low pressure plastic fittings for use with 1/8" tubing (plastic fitting provided with pump).
Valves with special fittings available on request.
Dimensions (DxWxH):
18.5 cm x 25 cm x 14.5 cm (7.3 in x 9.8 in x 5.7 in)
Weight:
5.4 kg (12 lbs)
Electrical:
Voltage/Frequency: 115VAC/60Hz
VA rating: 60
Fuse: 1 A
Motor:
brushless, AC Synchronous, TENV (totally enclosed non ventilated).

*Maximum flow rate specifications are based on theoretical volume displacement; actual flow rates will vary depending on such factors as fluid viscosity, compressibility and temperature. Minimum flow rates are stated per channel, maximum flow rates are stated with combined channels.

Overview »   Specifications   Parts »