Model BBB-4 VS Part Number 1471
HP Series pumps offer precise metering at high pressure.
Model BBB-4 VS:
- Flow rate 12.0 – 144.0 mL/min
- Maximum pressure 5000 psi
- Material of construction 316SS
- Electrical 115V/50-60Hz
- Remote control operation
Wetted Parts: For 316: type 316 stainless steel, sapphire, ruby, gold, uhmw polyethylene, CTFE.
Reproducibility: typically ±0.3%
Viscosity Limit: 500 centipoise
Tubing Connections:
- Inlet valves: 1/8″ Swagelok style
- Outlet valves: 1/8″ Swagelok style
- Valves with special fittings available on request.
Controller Dimensions (DxWxH): 21.4 cm x 15.6 cm x 10 cm (8.4 in x 6.2 in x 4 in )
Pump Dimensions (DxWxH): 32 cm x 23.5 cm x 13.4 cm (12 in x 9.25 in x 5.3 in)
Controller Weight: 3.6 kg (8 lbs)
Pump Weight: 10.4 kg (23 lbs)
Electrical:
- Voltage/Frequency: 115VAC/50-60Hz
- VA rating: 300
- Fuse: .8 A (motor); 15 A (line)
Motor: brushless, DC, TENV (totally enclosed non ventilated).
*Maximum flow rate specifications are based on theoretical volume displacement; actual flow rates will vary depending on such factors as fluid viscosity, compressibility, and temperature. Minimum flow rates are stated per channel, maximum flow rates are stated with combined channels.
Piston Seals
#1024 Piston seal assembly kit; includes one UHMW polyethylene seal, backup washer, and tools for installation.
#1187 Piston seal replacement kit; includes three UHMW polyethylene seals, backup washers..
Valves
#1373 Inlet valve assembly, cartridge-style, 1/8″ Swagelok style fitting.
#1374 Outlet valve assembly, cartridge-style, 1/8″ Swagelok style fitting.
#1381 Valve cartridge kit (rebuilds one inlet or one outlet valve).
Piston
#1034 1/4″ sapphire piston.
Liquid
#1038 Includes inlet and outlet valve assemblies, cylinder, piston seals, and retainer. Piston not included. End Assembly
Filters
#5776 10 micron sintered stainless steel filter, with 60 cm long Teflon inlet tube and tube nut.
Other Parts
#2908 Retainer assembly.
For additional parts, consult factory
Download product brochures and documentation from our Documentation page.