We do not offer on-site service. Our H/D workstation instrument has existed for 30+ years, so much literature is available. Please see our user guide, which details the customer setup…
Our pumps can be controlled with an analog signal or via an RS232 interface. To connect the pump to your system, you can use a USB to RS232 RJ12 (which…
Our Optos Pumps require DSR/DTR controls to work properly and specific wiring on the RJ12. We sell the cables: Eldex P/N: 6143 CABLE, RS232, USB to RJ12 Below is the…
Eldex Optos pumps can be controlled with an analog signal (0-5V, 4-20mA) or via an RS232 interface. High- and low-pressure limits can only be enabled when the Optos Series pump…
Eldex HP Series pumps do not have electronic controls; they use a manually adjusted micrometer to set the piston stroke length, which adjusts the flow rate. Our Optos series is…
Eldex Optos S and M model pumps with pulse dampers come standard with a 10-32 outlet valve. We offer the #6092 T-bracket adapter for Swagelok-style compression fittings for 1/8” tubing…