Can I dry run Eldex pumps (run the pump without liquid)?
We don’t recommend doing a dry run unless it is for a very short time, as it may lead to piston seal wear. If you need to run the pump…
We don’t recommend doing a dry run unless it is for a very short time, as it may lead to piston seal wear. If you need to run the pump…
The compressibility compensation factor depends on the fluid. As there are too many fluids, this can be looked up online (natural gas has a 0.5% correction in volume per 100psi…
We do not offer fittings for ¼” NPT connection, but adapters, such as Swagelok Fittings, are available.
Eldex Optos Series pumps are designed for the interchangeability of liquid ends, with piston sizes 3/32”, 1/8”, and 1/4”. A liquid end and piston are needed. Customers must change the…
Eldex ball and seat inlet and outlet check valves ensure precise metering. We now offer integrated one-piece check valves for stainless steel and ceramic options, with seals embedded into the…
Optos Series pumps fitted with a pulse damper can set high/low-pressure limits. When the high/low-pressure limit is violated, the pump stops running. If Optos pumps are not fitted with the…